Use first photography method such as carbon steel flange appearance record. In addition, the cleaning will remove the inspection of the bearing. To confirm the amount of residual lubricant and lubricant sampling, and then clean the bearing. And on the metal frame can be put in use at the bottom of the container. Bearing cleaning divided into rough washing and fine washing. Use the brush to remove grease or oil adhesion. If at this time in oil bearing, coarse washing flange. Note will damage due to foreign bodies such as rolling surface.

When oil, slowly turn the bearing, fine cleaning. Must be carefully. Commonly used cleaning agent for neutral aqueous diesel or kerosene, according to the need to sometimes use warm lye, etc. The theory of which one to use cleaner, want to often link filter clean. After cleaning, coating anticorrosive oil or antirust grease on the bearing immediately. Checking and judging to inspect the dimension precision, rotating accuracy, internal clearance as well as the matching surface, raceway surface, links and seal rings etc.

About the carbon steel flange inspection results, in order to judge can remove the bearings to use carbon steel flange. Can be used to bearing the judgement or master of bearing. Bearings shall not be used again, according to the mechanical properties and the importance of the scale of the judgment and inspection cycle, etc. If you have the following injury. Must be replaced.